Choosing a blood pressure monitor

An automatic blood pressure monitor is recommended for use at home. These monitors are easy to use. They do the measuring for you. Try to choose a monitor that has been tested and validated so that you can trust it to give accurate readings. Contact your doctor if you want help choosing a monitor.

A monitor that measures blood pressure in your arm is recommended for most people. Blood pressure monitors used on the wrist aren't as reliable as those that use arm cuffs. Wrist monitors should be used only by people who can't use arm cuffs for physical reasons. And devices that use finger monitors aren't recommended at all.

The size of the blood pressure cuff, Opens dialog and where you place it can greatly affect how accurate your monitor is. If the cuff is too small, Opens dialog or too large, Opens dialog, the results won't be right. You may have to measure your arm and choose a cuff that comes in the right size.

If you can, try to choose a monitor that saves the blood pressure readings. You may want to choose one that can print your results or send them directly to your doctor.

When you first get a blood pressure monitor, check its accuracy. Do this by comparing its readings with those you get at the doctor's office. Ask your doctor or nurse to watch you use your monitor to make sure that you are doing it right and that it works right. It's a good idea to compare your monitor readings with your doctor's office readings every year. If your monitor is not giving accurate readings, the manufacturer or a medical equipment supply company can test your monitor.

Using a blood pressure monitor at home

Before you take your blood pressure:

• Don't drink caffeine, smoke or vape, or exercise for at least 30 minutes before you take your blood pressure.
• Empty your bladder before the test.
• Sit with your back supported and both feet on the floor.
• Rest quietly for at least 5 minutes before you do the test.
• Do not move, talk, or text while you take your blood pressure.

Take your blood pressure twice a day if your doctor recommends it. Take it in the morning and evening. Here are the steps.

1. Sit with your arm slightly bent and resting on a table so that your upper arm is on the same level as your heart. Use the same arm each time you take your blood pressure.
2. Wrap the blood pressure cuff around your bare upper arm. The lower edge of the cuff should be about 1 inch (2.5 cm) above the bend of your elbow, Opens dialog.
3. Press the on/off button. You may need to wait until the screen says the monitor is ready.
4. Press the start button. The cuff will inflate and slowly deflate by itself.
5. Your blood pressure numbers will appear on the monitor.
6. If your monitor does not automatically save your blood pressure numbers, record them on your blood pressure log with the date and time. Also record any medicines you took and any activities you did.
7. Wait one minute and take your blood pressure again.

Your blood pressure log may help explain changes in your blood pressure readings and help your doctor make sure you get the right treatment.

Check your blood pressure cuff often. Make sure all of the parts of your monitor are in good condition. Even a small hole or crack in the tubing may cause inaccurate results.

Keeping a blood pressure log

You can use a home blood pressure log or a spreadsheet on your computer to record your blood pressure numbers, along with the date and time. The blood pressure monitor you use at home might have a feature that will record your numbers for you. Some monitors can transfer this information to your computer or to your doctor's office.

Also record your daily activities, such as the time you take medicine or when you exercise or if you feel upset or feel stressed.

Everyone's blood pressure changes from day to day and even from minute to minute sometimes. Blood pressure tends to be higher in the morning and lower at night. Stress, smoking or vaping, eating, exercise, cold, pain, noise, medicines, and even talking can affect it.